NISSAN 2012 Titan - Navigation System Owner's Manual - Manual (Page 96)

Black plate (94,1)
Model "NAV0-N" EDITED: 2009/ 7/ 6
When you are setting the destination to a facility,
the following methods are available.
. Setting a Point of Interest
This allows you to find a facility by type, and
then have the system calculate a route to
that destination. Specify the region and city
of the destination to find it more quickly.
. Setting a Freeway Entrance/Exit
This allows you to set the destination to an
entrance or exit of a freeway, and then have
the system calculate a route.
. Setting by Phone Number
If you know the telephone number of the
facility, use this to find the facility by entering
the number, and then have the system
calculate a route.
. Setting a Nearby Place
This allows you to set the destination to a
facility located near the current vehicle
location or another location that you move
to by scrolling the map, and then have the
system calculate a route.
If there are any particular Points of Interest
that you intend to use frequently, you can
store them in the list of nearby Points of
Interest.
“CUSTOMIZING NEARBY PLACES”
(page 6-33)
NAV2728
SETTING A POINT OF INTEREST
1. Push <DEST>.
2. Highlight [Points of Interest] and push
<ENTER>.
NAV2793
3. Highlight the main category and push
<ENTER>.
INFO:
Highlight [By Name] and push <ENTER> to
include all categories in the route calculation
conditions.
SETTING A FACILITY AS THE
DESTINATION
4-28 Setting a destination