Homelink, Universal transceiver (if so equipped) – NISSAN 2014 Titan - Quick Reference Guide User Manual

Page 21

Advertising
background image

19

To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.

05

For optimum performance, select the appropriate headphone channel

05

that corresponds to the headrest display being viewed directly in

front of you.

To watch or control videos on the front display make sure the vehicle
is in the P (PARK) position and the parking brake is applied.

To reduce driver distraction, the wireless headphones will not operate
while located in the front seats and movies will not be shown on the
front display while the vehicle is in any drive position.

To access standard DVD controls on the front display while playing a
DVD on the rear display, press the DISC•AUX button on the audio control panel while the
vehicle is in the P (PARK) position and the parking brake is applied.

For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your
Owner’s Manual.

HOMELINK

®

UNIVERSAL TRANSCEIVER (if so equipped)

The HomeLink

®

Universal Transceiver can learn and consolidate the functions of up to 3

different hand-held transmitters, operating items such as garage doors, property gates,
outdoor and indoor lights or alarm systems.

To program the HomeLink

®

Universal Transceiver:

• Position the handheld transceiver 1-3 in (26-76 mm) away from the HomeLink surface,

keeping the HomeLink indicator light in view.

• Press and hold the desired HomeLink button and the handheld transmitter button

simultaneously until the HomeLink indicator light flashes slowly and then rapidly.

• Both buttons may be released when the indicator light flashes rapidly.
To verify the programing is complete, press and hold the HomeLink button and observe the

indicator light:

• A solid continuous light indicates the programing is complete and the HomeLink button

will activate your device.

• A blinking light that turns to a solid continuous light after 2 seconds indicates additional

steps are required to complete the programing.

HOMELINK

1590746_14b_Titan_QRG_020414.indd 19

2/4/14 10:34 AM

Advertising