NISSAN 2012 Versa Hatchback - Owner's Manual User Manual

Page 165

Advertising
background image

ing will automatically be turned off and the last
radio station played will begin playing.

The FM stereo indicator (ST) illuminates during
FM stereo reception. When the stereo broadcast
signal is weak, the radio automatically changes
from stereo to monaural reception.

SAT band select:

Pressing the AUX button will change the band as
follows:

AUX

→ SAT1* → SAT2* → AUX (satellite, if so

equipped)

When the AUX button is pressed while the igni-
tion switch is in the ACC or ON position, the
radio will come on at the station last played.

The last station played will also come on when
the PWR button is pressed to turn the radio on.

*When the AUX button is pressed, the satellite
radio mode will be skipped unless an optional
satellite receiver and antenna are installed and an
XM

ா satellite radio service subscription is active.

Satellite radio is not available in Alaska, Hawaii
and Guam.

If a compact disc is playing when the AUX button
is pressed, the compact disc will automatically be
turned off and the last radio station played will
come on.

TUNE button (Tuning):

Press

the

TUNE/FF-REW/FOLDER

button

or

for manual tuning.

SEEK tuning:

Press the SEEK/TRACK button

or

to tune from low to high or high to low frequen-
cies and to stop at the next broadcasting station.

SCAN tuning:

Press the SCAN/RPT button to stop at each
broadcasting station for 5 seconds. Pressing the
button again during this 5 second period will stop
SCAN tuning and the radio will remain tuned to
that station. If the SCAN/RPT button is not
pressed within 5 seconds, SCAN tuning moves
to the next station.

1 to 6 Station memory operations:

Twelve stations can be set for the FM band (6 for
FM1, 6 for FM2) and six stations can be set for
the AM band.

1. Choose the radio band AM, FM1 or FM2

using the AM·FM select button.

2. Tune to the desired station using manual,

SEEK or SCAN tuning. Press and hold any
of the desired station memory buttons (1 –
6) until a beep sound is heard.

3. The channel indicator will then come on and

the sound will resume. Programming is now
complete.

4. Other buttons can be set in the same man-

ner.

If the battery cable is disconnected or if the fuse
opens, the radio memory will be canceled. In that
case, reset the desired stations.

DISP/TEXT button:

When the DISP/TEXT button is pressed while in
FM radio mode, the radio display will change as
follows:

Frequency

→ PTY → PS → Frequency

Compact disc (CD) player operation

If the radio is already operating, it automatically
turns off and the compact disc begins to play.

CD button:

When the CD button is pressed with the system
off and the compact disc loaded, the system will
turn on and the compact disc will start to play.

When the CD button is pressed with a compact
disc loaded and the radio playing, the radio will
automatically be turned off and the compact disc
will start to play.

4-32

Display screen, heater, air conditioner, audio and phone systems

Advertising