New system features, Around view, Monitor (if so equipped) – NISSAN 2014 Versa Note - Quick Reference Guide User Manual

Page 4

Advertising
background image

2

To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi

arouND view

®

MoNiTor (if so equipped)

With the ignition switch in the oN position, the

Around View

®

Monitor is activated by pressing

the CaMera button

01

, located on the

navigation unit, or by moving the shift lever to the
r (reverSe) position. The monitor displays
various views of the position of the vehicle.

When the vehicle is in the P (ParK), N (NeuTral) or D (Drive) position and the

CaMera button

01

is pressed, the following views will display in order:

new system features

When the vehicle is in the r (reverSe) position and the CaMera button

01

is

pressed, the following views will display in order:

The colored guide lines on the display screen indicate vehicle width and approximate

distances to objects with reference to the vehicle body line.

• Red 1.5 ft (0.5 m); Yellow 3 ft (1 m); Green 7 ft (2 m) and 10 ft (3 m).

For information regarding how to access additional viewing cycles, please refer to the “Monitor, climate, audio, phone and
voice recognition systems (section 4)
” of your Owner’s Manual.

01

Start from any control Panel screen

Front view & front-side view

Press

Press

Press

Front view & bird’s-eye view

Rear view & bird’s-eye view

Press

Rear view & front-side view

Press

1598304_14b_VersaHatchback_QRG_090613.indd 2

9/6/13 1:44 PM

Advertising