Windshield wiper and washer switch – NISSAN 2015 Versa Note - Quick Reference Guide User Manual

Page 13

Advertising
background image

To view detailed instructional videos regarding these and other features,

please go to www.nissanownersinfo.mobi.

11

WINDSHIELD WIPER AND WASHER SWITCH

Move the lever to one of the following positions to operate the windshield wipers:

1

Mist (MIST) – One sweep operation of

the wipers.

2

Intermittent (INT) – Wipers operate

intermittently. The intermittent operation
speed can be adjusted by twisting the time
control ring

3

(if so equipped) to increase

or decrease wiper speed.

4

Low (LO) – Wipers operate at a

continuous low-speed.

5

High (HI) – Wipers operate at a

continuous high-speed.

6

Washer

– Pull the lever toward you

to activate the washer. The wipers will
operate several times.

3

1

4

5

MIST

OFF

2

INT

LO

HI

6

9

HIGH BEAM SELECT
Push the headlight control switch forward

3

to select the high beam function. The blue
indicator light

illuminates in the instrument

panel. Pull the headlight switch back to the
original position to select the low beam. The blue
indicator light will extinguish.

Pull and release the headlight control switch

4

to flash the headlight high beams on and off.

FOG LIGHT SWITCH (if so equipped)
The headlights must be on and the low beams

selected for the fog lights to operate.

Turn the switch (inside collar) to the position

5

to turn the fog lights on.

Turn the switch (inside collar) to the OFF

position to turn the fog lights off.

LANE CHANGE SIGNAL
To signal a lane change, move the lever up or

down to the point where the indicator light
begins to flash, but the lever does not latch.

The turn signal will flash three times automatically.

For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.

3

4

5

1781503_15b_Versa_Note_QRG_072814.indd 11

7/28/14 2:08 PM

Advertising