NISSAN 2012 Versa Sedan - Quick Reference Guide - Manual (Page 8)

HeaDliGHT CoNTrol
HeAdLiGHT cOnTROL SWiTcH
Turn the headlight control switch to the
position
01
to turn on the front parking, tail, license plate and
instrument panel lights. Turn the switch to the
position
02
to turn on the headlights.
HiGH BeAM SeLecT
Push the headlight control switch forward
03
to
select the high beam function. The blue indicator
light illuminates in the instrument panel. Pull
the headlight switch back to the original position to
select the low beam. The blue indicator light goes off.
Pull and release the headlight control switch
04
to
flash the headlight high beams on and off.
fOG LiGHT SWiTcH (if so equipped)
NOTE: The headlights must be on and the low beams
selected for the fog lights to operate.
Turn the switch (inside collar) to the position
05
to turn the fog lights on.
Turn the switch (inside collar) to the oFF position to
turn the fog lights off.
for more information, refer to the “instruments and controls (section 2)”
of your Owner’s Manual.
6
first drive features
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.
01
02
05
03
04
wiNDSHielD wiPer/waSHer SwiTCH
Move the lever to the following positions to operate
the windshield wipers:
01
Mist (MiST) - One sweep operation of the
wipers.
02
intermittent (iNT) - Wipers operate
intermittently. The intermittent operation speed
can be adjusted by twisting the time control
ring 03 .
04
Low (lo) - Wipers operate at a continuous
low-speed.
05
High (Hi) - Wipers operate at a continuous
high-speed.
06
Pull the lever toward you to activate the washer.
The wipers will operate several times.
for more information, refer to the “instruments and controls (section 2)” of your Owner’s Manual.
03
01
02
04
05
MiST
oFF
iNT
lo
Hi
06