Jump starting -15, Drive belt -15 – NISSAN 2012 Versa Sedan - Owner's Manual User Manual
Page 246
![background image](/manuals/602834/246/background.png)
Vehicles operated in high temperatures or under
severe conditions require frequent checks of the
battery fluid level.
JUMP STARTING
If jump starting is necessary, see “Jump starting”
in the “In case of emergency” section of this
manual. If the engine does not start by jump
starting, the battery may have to be replaced.
Contact a NISSAN dealer.
1.
Water pump
2.
Generator
3.
Crankshaft pulley
4.
Air conditioner compressor
(if so equipped)
5.
Manual tensioner
᭡ Tension checking point
WARNING
Be sure the ignition switch is placed in the
OFF or LOCK position before servicing
drive
belt.
The
engine
could
rotate
unexpectedly.
1. Visually inspect the belt for signs of unusual
wear, cuts, or fraying. If the belt is in poor
condition, have it replaced or adjusted by a
NISSAN dealer.
2. Have the belt checked regularly for condi-
tion.
WDI0695
DRIVE BELT
Maintenance and do-it-yourself
8-15