Windshield wiper and washer switch -21, Switch operation -21 – NISSAN 2014 Versa Sedan - Owner's Manual User Manual

Page 90

Advertising
background image

FCC Notice:

For USA:

This device complies with part 15 of the
FCC Rules. Operation is subject to the fol-
lowing two conditions; (1) This device may
not cause harmful interference, and (2) this
device must accept any interference re-
ceived, including interference that may
cause undesired operation of the device.

NOTE:

Changes or modifications not expressly ap-
proved by the party responsible for compli-
ance could void the user’s authority to op-
erate the equipment.

For Canada:

This device complies with RSS-210 of In-
dustry Canada. Operation is subject to the
following two conditions; (1) This device
may not cause harmful interference, and (2)
this device must accept any interference
received, including interference that may
cause undesired operation of the device.

Security indicator light

This light blinks whenever the ignition switch is
placed in the LOCK, OFF or ACC position.

This function indicates the NISSAN Vehicle Im-
mobilizer System is operational.

If the NISSAN Vehicle Immobilizer System is mal-
functioning, the light will remain on while the
ignition switch is placed in the ON position.

If the light still remains on and/or the en-
gine will not start, see a NISSAN dealer for
NISSAN Vehicle Immobilizer System ser-
vice as soon as possible. Please bring all
registered keys that you have when visiting
your NISSAN dealer for service.

SWITCH OPERATION

The windshield wiper and washer operates when
the ignition switch is in the ON position.

Push the lever down to operate the wiper at the
following speed:

1

Intermittent (INT) — intermittent operation
can be adjusted by turning the knob toward

A

(Slower) or

B

(Faster).

2

Low (LO) — continuous low speed operation

3

High (HI) — continuous high speed opera-
tion

LIC0474

Type A

LIC2153

WINDSHIELD WIPER AND WASHER
SWITCH

Instruments and controls

2-21

Advertising