CDA Built Under Double Oven DV 770 - Manual (Page 43)

43
Connection the Double Oven Mains Cable
Important!
This oven must be connected to the mains power supply only by a suitably qualified person.
Unscrew the screws A securing the cover plate B behind the oven (fig. 40).
– Remove the cover plate B.
– Remove the screws C from the cable clamp (fig. 41).
– Insert the mains cable (type H05RR-F or H05VV-F - 3x2,5 mm
2 section) into the cable protector P.
– Connect the phase and earth cables to the mains terminal connection block D.
EARTH
N NEUTRAL
L LIVE
– Refit the cable clamp so that it clamps the outer sleeving of the cable, and screw the screws C.
– Refit the cover plate B and fix it with the screws A.
WARNING: This appliance must be earthed
A
B
C
P
D
Green
&
Yellow
(Earth)
Brown (Live)
Blue (Neutral)
A
B
Fig. 40 Fig. 41