NISSAN 2012 Xterra - Quick Reference Guide - Manual (Page 11)

CruisE Control
The cruise control system enables you to set a constant
cruising speed once the vehicle has reached 25 mph.
The system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.
To activate the cruise control, push the ON•OFF
switch
01
. The CruisE indicator light in the
instrument panel will illuminate.
To set cruising speed, accelerate the vehicle to the
desired speed, push the Coast/sEt switch
02
and release. The sEt indicator light in the instrument panel will illuminate. Take your foot off
the accelerator pedal. Your vehicle will maintain the set speed.
To reset at a faster cruising speed, push and hold the aCCEl/rEs switch 03
. When the
vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the Coast/sEt switch 02
. Release
the switch when the vehicle slows to the desired speed.
To cancel the preset speed, tap the brake pedal or push the CanCEl switch 04 .
To turn off cruise control, push the ON•OFF switch 01
. Both the CruisE
indicator light and sEt indicator light in the instrument panel will turn off.
for more information, refer to the “starting and driving (section 5)” of your Owner’s Manual.
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.
03
sEEK/traCK Button
To scan quickly through each broadcasting station, press the sEEK/traCK button.
To skip from one track to another on a cd, press the sEEK/traCK button. Each
time the button is pressed, the CD will advance or skip back one track.
04
station anD CD sElECt Buttons
Eighteen stations can be set in any combination of FM, AM and XM ® satellite radio stations.
To store a station in a preset you must first select the A, B, or C memory bank by pressing
the PrEsEt a·B·C button 05
.
Then tune to the desired fM, AM or XM station.
Next press and hold the desired station select button (1-6) for at least 2 seconds. When
the preset indicator illuminates, a beep will sound, indicating memorization is complete.
To retrieve a previously set station, select the memory bank where the preset was set,
then press the corresponding station select button (1-6).
While playing a cd, to select a different cd loaded into the cd changer, press one
of the CD select buttons (1-6).
for more information, refer to the “Heater, air conditioner, audio and phone systems (section 4)” of your Owner’s Manual.
03
02
04
01
9