NISSAN 2012 Xterra - Owner's Manual User Manual
Page 37
Stowing the center seat belt
When folding down the rear seat, the rear center
seat belt can be retracted into a stowed position
as follows:
1. Hold the connector tongue
᭺
1
so that the
seat belt does not retract suddenly when the
tongue is released from the connector
buckle.
2. Insert a suitable tool such as a key
᭺
A
into
the connector buckle and release the con-
nector tongue
᭺
1
.
3. Fold the connector as illustrated
᭺
2
.
4. Then secure the connector tongue into the
retractor base
᭺
3
in the ceiling.
WARNING
● Do not unfasten the rear center seat
belt connector except when folding
down the rear seat.
● When attaching the rear center seat
belt connector, be certain that the seat-
backs are completely secured in the
latched position and the rear center
seat
belt
connector
is
completely
secured.
● If the rear center seat belt connector
and the seatbacks are not secured in
the correct position, serious personal
injury may result in an accident or sud-
den stop.
LRS0602
1-20
Safety—Seats, seat belts and supplemental restraint system