NISSAN 2014 Xterra - Owner's Manual - Manual (Page 317)

To replace the filter, perform the following proce-
dure:
1. Open the glove box and press in on the
sides so that it will open completely allowing
it to hang by the cord.
2. Gently lift up on the tab
᭺
1 .
3. Pull the filter cover toward you and then
down
᭺
2 .
4. Remove the old filters
᭺
3 .
NOTE:
The filters are marked with air flow arrows.
The end of the filter with the arrow should
face the rear of the vehicle. The arrows
should face downward.
5. Insert the first new filter into the housing and
slide it over to the right. Insert the second
new filter into the housing.
LDI0442 LDI2047
8-18 Maintenance and do-it-yourself