Granite Digital SATA G5 Mounting Bracket Kit - Manual (Page 10)

Granite Digital • 3101 Whipple Rd. • Union City, Ca. 94587 www.granitedigital.com
Bracket, Drive, & Host Installation Page 10
Installing the SATA Power Cable
The SATA Power Cable is routed above
the fans and through the DVD Cable cut-out
in the rear. Push the white 4 Pin connectors
through the hole.
The black SATA Power Connectors plug into
the drives while the white 4 Pin patch con-
nector goes in-line with the DVD Drive and
its existing power cable.
Plug the white male connector into the
existing G5 DVD power connector.
Plug the white female connector into
the DVD Drive. Push firmly to make sure
the pins are locked into place.
Slide the DVD Drive back into place
while feeding the 40 pin Data Cable back
through the hole along with the excess SATA
Power Cable. Lock both latches.