ITC Hemochron Signature+ Whole Blood Microcoagulation System - Manual (Page 38)

38
Note: This allows confirmation that failure counts and 911 use counts will be reset on
cloning. If a box is left blank, the corresponding count will not be reset.
4.
Click OK to continue.
5.
The Write Configuration dialog box is displayed:
6.
Click Start. Progress information is displayed in the status line.
7.
When writing of configuration data is completed, click Exit.
Printing Instrument Configuration Data
All of the configuration parameters for an individual instrument or configuration file can be printed.
1.
(If needed) Link the instrument to the PC (see page 26).
2.
(If needed) Start HEMOCHRON Configuration Manager and select the configuration file that is
to be downloaded (see page 30) or click on Read Configuration From Instrument.
3.
The Configuration Module dialog box is displayed.
4.
Select View/Print Configuration. The configuration report is displayed. Click Print using the
printer icon.
Displaying and Printing Specific Configuration Reports
Several types of configuration reports can be displayed and printed. The reports provide an audit trail for
specific information from all configuration files (or for all instruments) stored in the database:
Specific Report Description
Instrument Options Listing Lists the instrument options.
Operator Table Listing Lists specified OIDs and PINs.
QC Lock-Out Control Listing Lists selections for EQC/LQC Lock Out.
User Notes Listing Lists the user notes that have been defined.
Audit Trail Report Lists the changes made to configuration data files. The report
can be sorted by date or user name.
To Prepare a Specific Configuration Report:
1.
Select Reports in the Configuration Manager main menu.
2.
Select the desired report type from the Reports menu. The specified information is displayed.
3.
Click Print to print the report.