ITC IRMA TruPoint Blood Analysis System - Manual (Page 115)

7.19
Editing an established control
1. Press QC on the SETTING OPTIONS menu.
2. Press Controls on the QC SETTINGS menu.
3. Highlight the product type of choice. Press next .
4. The Controls screen displays a picklist of current controls. Highlight the
control to be edited, and press limits .
5. The analyzer displays the current limits for the
highlighted control. Press edit and follow the
series of entry screens to edit control
expiration date, analytes to be reported for the
control, and control limits.
Deleting a control
1. Press QC on the SETTING OPTIONS menu.
2. Press Controls on the QC SETTINGS menu.
3. Highlight the button next to the product type of choice. Press next .
4. The Controls screen displays a picklist of current controls. Highlight the
control to be deleted. Press delete .
5. A screen appears to verify the deletion request for the selected control.
Press ok to delete the selected control. The screen returns to the Controls
screen. The control is deleted, but associated QC results remain in the
analyzer memory. Results for a deleted control may be recalled only via
the Search All option, not by control lot number.
USER ID SETTINGS
The analyzer can maintain a maximum of 600 User IDs. Each ID can be from
1 to 16 alpha-numeric characters in length. QA Users can access User ID
Options by pressing User ID from the SETTING OPTIONS menu. A picklist
with following options is presented:
UserID: User ID can be turned “on” or “off” and configured to appear
on IRMA TruPoint results printout.
Add User: New User IDs can be added to
analyzer memory and granted
privileges from one of 3 categories:
QA Users, General Users, or Gluc
Strip Users.