ITC ProTime Microcoagulation System - Manual (Page 16)

16
MAIN MENU OPTIONS
The options presented in the MAIN MENU are:
Each of these options will lead to sub menus within the selection. The following buttons are used to navigate
the menu:
• The button is used to move the highlight bar to select the option.
• The button is used to select the option that is highlighted.
Note: The option to run external QC samples and store the results tagged as QC is accessed
through RUN LQC selection. This is not required to use the ProTime system. For more
information on this option, refer to Appendix I.
Run Test
To run the test select RUN TEST menu item. The instrument does a SELF CHECK procedure, which may
take up to 60 seconds. The following screen is displayed for this period of time:
The test sequence continues as described previously in the Test Procedure section.
When the test completes, the result will appear as below.
Note: “X” is used for illustrative purposes only in the following examples.
RUN LQC
The need to run Liquid Quality Control (LQC) is a feature designed for use by professionals. Instructions
for use of the feature appear in Appendix I.