Dodge 2009 Avenger Quick Reference Guide - Manual (Page 10)

speed Control leVer
CRUISE oN/oFF
• Press the oN/oFF button to activate the Speed Control.
• CRUISE will appear on the instrument cluster to indicate the
Speed Control is on.
• Press the oN/oFF button a second time to turn the system off.
SET
• With Speed Control on, press down and release the lever to set a
desired speed.
ACCEL/DECEL
• Press and hold the lever up to accelerate or down to decelerate
the vehicle; release the lever to save the new set speed.
• once a speed is set, tapping the lever up or down will increase
or decrease the set speed approximately 1 mph (2 km/h).
CANCEL
• Pull the lever toward you, or apply the brakes to cancel the set
speed and maintain the set speed memory.
• Press the oN/oFF button to turn the system off and erase the set
speed memory.
RESUME
• To resume a previously selected set speed in memory, press the lever
up and release.
press oN/off
Button
196635_09b_Avenger_QRG_121608.indd 11 4/24/09 2:20:06 PM