Dodge 2009 Challenger - Quick Reference Guide - Manual (Page 11)

turn siGnal/wiPers/washer/hiGh beam lever
TURN siGNaLs/LaNE CHaNGE assisT
• Tap the lever up or down once and the turn signal (right or left) will
flash three times and automatically turn off.
FRONT WiPERs
intermittent, Low and High Operation
• Rotate the end of the lever to the first detent position for one of six
intermittent settings, the second detent for low wiper operation and
the third detent for high wiper operation.
Mist
• Push the end of the lever inward to the first detent and release
when a single wipe is desired.
Washer Operation
• Push the end of the lever inward to the second detent and hold for as
long as spray is desired.
HiGH BEaM OPERaTiON
• Push the lever forward to activate the high beams.
eleCtroniC vehiCle inFormation Center (eviC) Controls
• The EVIC features a driver interactive display that is located
in the instrument cluster. Pressing the controls on the steering
wheel allows the driver to select vehicle information and
Personal settings.
• Refer to Owner’s Manual for further details.
Washer (Push to Second Detent)
Mist (Push
to First Detent)
Wipers
Push Lever for
high Beams
175469_09_Challenger_QRG_102008.indd 12 4/24/09 1:25:30 PM