Dodge 2009 Charger - Quick Reference Guide - Manual (Page 10)

sPeed Control lever
CRUiSE ON/OFF
• Push the ON/OFF button to activate the Speed Control.
• The Speed Control symbol
will appear on the instrument cluster
to indicate the Speed Control is on.
• Push the ON/OFF button a second time to turn the system off.
SET
• With Speed Control on, press down and release the lever to set a
desired speed.
ACCEL/DECEL
• Press and hold the lever up to accelerate or down to decelerate
the vehicle; release the lever to save the new set speed.
• Once a speed is set, tapping the lever up or down will increase
or decrease the set speed approximately 1 mph (2 km/h).
CANCEL
• Pull the lever toward you, or apply the brakes to cancel the set
speed and maintain the set speed memory.
• Push the ON/OFF button to turn the system off and erase the set
speed memory.
RESUME
• To resume a previously selected set speed in memory, push the lever
up and release.
Mist (Push
to first Detent)
Push ON/Off
Button
175470_09_Charger_QRG_101408.indd 11 4/24/09 1:28:52 PM