Dodge 2010 Charger - Supplement - Manual (Page 8)

WARNING! (Continued)
• If your vehicle is equipped with left and right side
curtain airbags, care must be taken when install-
ing any type of roof equipment. Drilling and
installation of fasteners or other equipment that
may interfere with the side-curtain airbags and
airbag wiring harness, is not permitted. Further-
more, make sure that no equipment or fasteners
are located in the airbag deployment zone.
• Do not place objects or mount equipment in front
of the airbag module cover, or in front of the seat
areas that may come in contact with a deploying
airbag.
• Dash, tunnel or console-mounted equipment
should not be placed outside of the specified zone.
• Failure to follow these instructions could result in
personal injury.
Airbag Deployment Zones
There are four zones to be aware of:
1. Driver Airbag Deployment Zone (Fig. 1), and Driver
Airbag/Steering Wheel Specifications (Fig. 2)
2. Passenger Airbag Deployment Zone (Fig. 3) and (Fig.
4)
3. Side-Curtain Airbag Deployment Zone (Fig. 5)
4. Seat-Mounted Airbag Deployment Zone (Fig. 6)
8 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE