Connecting the ipod, Using this feature – Dodge 2010 Grand Caravan - Owner Manual User Manual

Page 285

Advertising
background image

• Connecting an iPod௡ to the AUX port located in the

radio faceplate, plays media, but does not use the UCI
feature to control the connected device.

Connecting The iPod

Use the provided connection cable to connect an iPod

௡ to

the vehicle’s 16–pin connector port (which is located in
the glove compartment on some vehicles). Once the
iPod

௡ is connected and synchronized to the vehicle’s UCI

system (iPod

௡ may take a few seconds to connect), the

iPod

௡ starts charging and is ready for use by pressing

radio switches, as described below.

NOTE:

• It may be necessary to remove the connector pin

protection cap from the 16–pin connector port, prior to
connecting the cable.

• If the iPod௡ battery is completely discharged, it may

not communicate with the UCI system until a mini-
mum charge is attained. Leaving the iPod

௡ connected

to the UCI system may charge it to the required level.

Using This Feature

By using the provided connection cable to connect an
iPod

௡ to the vehicle’s UCI 16–pin connector port:

• The iPod௡ audio can be played on the vehicle’s sound

system, providing metadata (artist, track title, album,
etc.) information on the radio display.

• The iPod௡ can be controlled using the radio buttons to

Play, Browse, and List the iPod

௡ contents.

• The iPod௡ battery charges when plugged into the UCI

connector (if supported by the specific iPod

௡ device)

284

UNDERSTANDING YOUR INSTRUMENT PANEL

Advertising