Tilt / telescoping steering column, Programmable features, Key fob programmable features – Dodge 2010 Charger_SRT - User Guide User Manual

Page 17: Getting started

Advertising
background image

TILT / TELESCOPING STEERING COLUMN

• The tilt/telescoping control handle is

located below the steering wheel at the end
of the steering column.

• Pull the lever rearward to unlock the

steering column.

• To tilt the steering column, move the

steering wheel upward or downward as
desired. To lengthen or shorten the steering
column, pull the steering wheel outward or
push it inward as desired.

• Push forward on the lever to lock the column firmly in place.

WARNING!

Do not adjust the steering wheel while driving. The tilt/telescoping adjustment must
be locked while driving. Adjusting the steering wheel while driving or driving without
the tilt/telescoping adjustment locked could cause the driver to lose control of the
vehicle. Failure to follow this warning may result in serious injury or death.

PROGRAMMABLE FEATURES

Electronic Vehicle Information Center (EVIC) – If Equipped

• The EVIC can be used to program the following Personal Settings. Press and release

the MENU button

until Personal Settings displays, then press the SCROLL

button

to scroll through the settings. Press the FUNCTION SELECT button

to

change the setting.

• Language

• Headlamp Off Delay

• Auto Door Locks

• Key-Off Power Delay

• Auto UNLK On Exit

• AWD System Displays

• RKE Unlock

• Display ECO

• Sound Horn With RKE Lock

• Display Units of Measure In

• Flash Lamp Lock

• Turn-By-Turn Navigation

• Turn Headlamps On With Wipers

• Confirmation of Voice Commands

• Turn Headlamps On With Remote Key Unlock

Key Fob Programmable Features

• The following features may also be programmed by using the Key Fob transmitter or

the ignition switch and driver's door lock switch.

15

GETTING STARTED

Advertising
This manual is related to the following products: