Operating your vehicle, Turn signal/wiper/washer/high beam lever, Turn signal/lane change assist – Dodge 2010 Charger_SRT - User Guide User Manual

Page 19: Front wipers, High beam operation

Advertising
background image

TURN SIGNAL/WIPER/WASHER/HIGH BEAM LEVER

Turn Signal/Lane Change Assist

• Tap the lever up or down once and the turn signal (right or left) will flash three times

and automatically turn off.

Front Wipers

Intermittent, Low And High Operation

• Rotate the end of the lever to the first detent position for one of five intermittent

settings, the second detent for low wiper operation and the third detent for high wiper
operation.

Mist

• Push the end of the lever inward to the first detent when a single wipe is desired.

Washer Operation

• Push the end of the lever inward to the second detent and hold for as long as spray is

desired.

High Beam Operation

• Push the lever forward to activate the high beams. Pull the lever toward you for flash

to pass.

NOTE: For safe driving, turn off high beams when oncoming traffic is present to prevent
headlight glare and as a courtesy to other motorists.

17

OPERATING YOUR VEHICLE

Advertising
This manual is related to the following products: