Auxiliary mode, Clock setting, Station presets – Dodge 2010 Nitro - User Guide User Manual

Page 27: How to load multiple cds/dvds, Electronics

Advertising
background image

Auxiliary Mode

• The auxiliary (AUX) jack allows a portable device, such as an MP3 player or a cassette

player, to be plugged into the radio and utilize the vehicle’s audio system to amplify
the source and play through the vehicle speakers.

• Pressing the AUX button will change the mode to auxiliary device if the AUX jack is

connected.

• The control of the external device cannot be provided by the radio; use the device

controls instead.

Clock Setting

• Press and hold the TIME button until the hours blink; turn the TUNE/SCROLL control

knob to set the hours.

• Press the TUNE/SCROLL control knob until the minutes begin to blink; turn the

TUNE/SCROLL control knob to set the minutes.

• Press the TUNE/SCROLL control knob to save the time change.

• To exit, press any button/knob or wait five seconds.

Station Presets

• Press the SET/RND button once and SET 1 will show in the display. Then select the

button (1–6).

• A second station may be added to each push button. Press the SET/RND button twice

and SET 2 will show in the display, then select button (1–6).

How To Load Multiple CDs/DVDs

REQ Radio Only

• Press the LOAD button and then press the button with the corresponding number

(1–6) where the CD is being loaded. The radio will display PLEASE WAIT and prompt
when to INSERT DISC.

• After the radio displays INSERT DISC, insert the CD into the player. The radio display

will show LOADING DISC when the disc is loading and “READING DISC” when the radio
is reading the disc.

• Press the eject button and then the corresponding number (1–6) to eject the desired

disc.

25

ELECTRONICS

Advertising