Programming additional transmitters, Transmitter battery replacement – Dodge 2011 Avenger - Owner Manual User Manual

Page 28

Advertising
background image

Programming Additional Transmitters

Refer to Sentry Key

௡ “Customer Key Programming.”

If you do not have a programmed RKE transmitter,
contact your authorized dealer for details.

Transmitter Battery Replacement

The recommended replacement battery is CR2032.

NOTE:

Perchlorate Material — special handling may

apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate

1. With the RKE transmitter buttons facing down, use a
flat blade screwdriver to pry the two halves of the RKE
transmitter apart. Make sure not to damage the seal
during removal.

2. Remove and replace the battery. Avoid touching the
new battery with your fingers. Skin oils may cause
battery deterioration. If you touch a battery, clean it with
rubbing alcohol.

3. To assemble the RKE transmitter case, snap the two
halves together.

Separating RKE Transmitter Halves

26

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising