General information, Driving on slippery surfaces, Acceleration – Dodge 2011 Caliber - Owner Manual User Manual

Page 305

Advertising
background image

AutoStick

Is Deactivated:

• By holding the shift lever to (+) momentarily
• When the shift lever is shifted out of DRIVE
• When in sixth position, touching the shift lever to the

right

• When heavy Anti-Lock Brake System (ABS) applica-

tion is detected

General Information

• If a ratio other than first is selected and the vehicle is

brought to a stop, the transmission control logic will
automatically select the first gear ratio.

• If a low range is selected and the engine accelerates to

the rev limit, the transmission will automatically select
the next higher ratio.

• If a downshift would cause the engine to overspeed,

that shift will not occur until it is safe for the engine.
However, the CVT will stay in the manually selected
ratio.

• If the system detects powertrain overheating, the

transmission will revert to the automatic shift mode
and remain in that mode until the powertrain cools off.

• If the system detects a problem, it will disable the

AutoStick

௡ mode and the transmission will return to

the automatic mode until the problem is corrected.

DRIVING ON SLIPPERY SURFACES

Acceleration

Rapid acceleration on snow covered, wet, or other slip-
pery surfaces may cause the driving wheels to pull
erratically to the right or left. This phenomenon occurs
when there is a difference in the surface traction under
the front (driving) wheels.

5

STARTING AND OPERATING

303

Advertising