Speed control, Cruise on/off, Accel/decel – Dodge 2011 Charger - User Guide User Manual

Page 26: Resume, Cancel, Adaptive cruise control (acc), Operating your vehicle

Advertising
background image

SPEED CONTROL

• The speed control switches are located

on the steering wheel.

Cruise ON/OFF

• Push the ON/OFF button to activate

the Speed Control.

• CRUISE READY

will appear on the

instrument cluster to indicate the
Speed Control is on.

• Push the ON/OFF button a second time

to turn the system off.

Set

• With the Speed Control on, push and release the SET – button to set a desired

speed.

Accel/Decel

• Once a speed is set, pushing the RES + button once or the SET – button once will

increase or decrease the set speed approximately 1 mph (2 km/h).

• Push and hold the RES + button to accelerate in 5mph (8 km/h) increments or

push and hold the SET – button to decelerate in 5mph (8 km/h) increments;
release the button to save the new set speed.

Resume

• To resume a previously selected set speed in memory, push the RES + button and

release.

Cancel

• Push the CANCEL button, or apply the brakes to cancel the set speed and

maintain the set speed memory.

• Push the ON/OFF button to turn the system off and erase the set speed memory.

Adaptive Cruise Control (ACC)

• If your vehicle is equipped with adaptive cruise control the controls operate exactly

the same as the standard cruise control with one difference. You can set a
specified distance you would like to maintain between you and the vehicle in front
of you.

• If the ACC sensor detects a vehicle ahead, ACC will apply limited braking or

acceleration automatically to maintain a preset following distance, while matching
the speed of the vehicle ahead.

• If the sensor does not detect a vehicle directly ahead of you, it functions like a

standard cruise control system, maintaining the speed you set.

OPERATING YOUR VEHICLE

24

Advertising