Enhanced seat belt use reminder system, Beltalert – Dodge 2011 Dakota User Manual

Page 51

Advertising
background image

WARNING!

The belt and retractor assembly must be replaced

if the seat belt assembly Automatic Locking Re-
tractor (ALR) feature or any other seat belt func-
tion is not working properly when checked ac-
cording to the procedures in the Service Manual.

Failure to replace the belt and retractor assembly

could increase the risk of injury in accidents.

Enhanced Seat Belt Use Reminder System
(BeltAlert

)

BeltAlert

௡ is a feature intended to remind the driver to

fasten their seat belt. This feature is active whenever the
ignition is on. If the driver is unbelted, the Seat Belt
Reminder Light will turn on and remain on until the
driver seat belt is fastened. BeltAlert

௡ triggers within

60 seconds of vehicle speed over 5 mph (8 km/h). The
reminder sequence lasts for 96 seconds or until the driver
seat belt is fastened. After the sequence completes, the
Seat Belt Reminder Light remains illuminated until the
driver seat belt is fastened. The driver should instruct all
other occupants to fasten their seat belts. If the driver seat
belt is unbuckled while traveling at speeds greater than
5 mph (8 km/h), BeltAlert

௡ will chime as a single

notification and illuminate the Seat Belt Reminder Light,
then will proceed to the 96 second reminder sequence.

BeltAlert

௡ will be reactivated if the driver’s seat belt is

unbuckled for more than 10 seconds and the vehicle
speed is greater than 5 mph (8 km/h).

BeltAlert

Programming

Chrysler Group LLC does not recommend deactivating
the BeltAlert

௡.

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

49

Advertising