Dodge 2011 Journey - Owner Manual - Manual (Page 503)

4. Rotate the applicable bulb’s electrical connector 1 ⁄
4
turn counterclockwise and remove it from the housing.
5. Remove the bulb from the connector socket and install
the replacement bulb.
6. Install the bulb and connector assembly into the
housing and rotate the connector
1 ⁄
4
turn clockwise to
lock it in place.
7. Reinstall the taillamp housing and fasteners.
License Plate Lamp
1. Push the small locking tab sticking out of the end of
the lens toward the side of the vehicle and hold it in that
position.
License Lamp
7
MAINTAINING YOUR VEHICLE 501