Starting procedures, Automatic transmission, Normal starting – Dodge 2012 Avenger - Owner Manual User Manual

Page 300

Advertising
background image

STARTING PROCEDURES

Before starting your vehicle, adjust your seat, adjust the
inside and outside mirrors, fasten your seat belt, and if
present, instruct all other occupants to buckle their seat
belts.

WARNING!

When leaving the vehicle, always remove the key

fob from the ignition and lock your vehicle.

Never leave children alone in a vehicle, or with

access to an unlocked vehicle. Allowing children
to be in a vehicle unattended is dangerous for a
number of reasons. A child or others could be
seriously or fatally injured. Children should be
warned not to touch the parking brake, brake
pedal or the shift lever.

Automatic Transmission

The shift lever must be in the PARK or NEUTRAL
position before you can start the engine. Apply the brakes
before shifting to any driving gear.

NOTE:

The ignition switch must be in the ON position,

and you must press the brake pedal before shifting out of
PARK.

Normal Starting

NOTE:

Normal starting of either a cold or a warm

engine is obtained without pumping or pressing the
accelerator pedal.

For vehicles not equipped with Tip Start (Four-Speed
Transmission),

turn the ignition switch to the START

position and release it when the engine starts. If the
engine fails to start within 10 seconds, turn the ignition
switch to the LOCK position, wait 10 to 15 seconds, then
repeat the “Normal Starting” procedure.

298

STARTING AND OPERATING

Advertising