Uconnect™ phone, Phone pairing, Electronics – Dodge 2012 Avenger - User Guide User Manual

Page 55: Warning

Advertising
background image

• Compatible iPod

®

devices may also be controllable using voice commands. Refer

to the Owner's Manual on the DVD for details.

NOTE:
• The USB port supports certain Mini, Classic, Nano, Touch, and iPhone

®

devices. The

USB port also supports playing music from compatible external USB Mass Storage
Class memory devices. For supported audio file formats, refer to the USB Port
section in the Owner's Manual on the DVD. Refer to www.UconnectPhone.com
website for a list of tested iPod

®

s. Some iPod

®

software versions may not fully

support the USB port features. Please visit Apple’s website for iPod

®

software

updates.

WARNING!

Do not plug in or remove the iPod

®

or external device while driving. Failure to

follow this warning could result in a collision.

Uconnect™ Phone

• To determine if your vehicle is equipped with Uconnect™ Phone, press the

“Uconnect™ Phone” button

. If your vehicle has this feature, after a couple

seconds you will hear a voice prompt. If not, you will see a message on the radio
“Uconnect phone not available”.

• The Uconnect™ Phone is a voice-activated, hands-free, in-vehicle communications

system with Voice Command Capability (see Voice Command section).

NOTE: To access the tutorial, press the “Uconnect™ Phone” button

. After the

BEEP, say “tutorial”. Press any hard-key/button or touch the display (Touch-Screen
radio) to cancel the tutorial.

• The Uconnect™ Phone allows you to dial a phone number with your mobile phone

using simple voice commands.

• Refer to your vehicle Owner's Manual on the DVD for further details.

NOTE: The Uconnect™ Phone requires a mobile phone equipped with the Bluetooth

®

Hands-Free Profile, Version 1.0 or higher. For Uconnect™ customer support, call
1–877–855–8400 or visit www.UconnectPhone.com.

Phone Pairing

NOTE: Pairing is a one-time initial setup before using the phone.

• Press the “Phone” button

to begin.

• Wait for the “ready” prompt and BEEP.

• (After the BEEP), say ”setup” or “Uconnect device setup”.

• (After the BEEP), say “device pairing”.

ELECTRONICS

53

Advertising