Cleaning the parksenseĥ system, Parksenseĥ system usage precautions, Cleaning the parksense௡ system – Dodge 2012 Charger - Owner Manual User Manual

Page 253: Parksense௡ system usage precautions

Advertising
background image

Information Center (EVIC)” in “Understanding Your
Instrument Panel” for further information. When the
shift lever is moved to REVERSE and the system has
detected a fault condition, the EVIC will display the
“CLEAN PARK ASSIST”, “SERVICE PARK ASSIST” or
the “SERVICE PARK ASSIST SYSTEM” message for as
long as the vehicle is in REVERSE. Under this condition,
ParkSense

௡ will not operate.

If “CLEAN PARK ASSIST” appears in the EVIC make
sure the rear fascia/bumper is clean and clear of snow,
ice, mud, dirt or other obstruction and then cycle the
ignition. If the message appears again, see an authorized
dealer.

If “SERVICE PARK ASSIST” or “SERVICE PARK ASSIST
SYSTEM” appears in the EVIC, see an authorized dealer.

Cleaning The ParkSense

System

Clean the ParkSense

௡ sensors with water, car wash soap

and a soft cloth. Do not use rough or hard cloths. Do not
scratch or poke the sensors. Otherwise, you could dam-
age the sensors.

ParkSense

System Usage Precautions

NOTE:

• Ensure that the rear bumper is free of snow, ice, mud,

dirt and debris to keep the ParkSense

௡ system operat-

ing properly.

• Jackhammers, large trucks, and other vibrations could

affect the performance of ParkSense

௡.

• When you turn ParkSense௡ off, the EVIC will display

“PARK ASSIST SYSTEM OFF.” Furthermore, once you
turn ParkSense

௡ off, it remains off until you turn it on

again, even if you cycle the ignition key.

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

251

Advertising
This manual is related to the following products: