Lane change assist, High/low beam switch, Flash-to-pass – Dodge 2012 Charger - Owner Manual User Manual

Page 207: Front map/reading lights

Advertising
background image

Lane Change Assist

Tap the lever up or down once, without moving beyond
the detent, and the turn signal (right or left) will flash
three times then automatically turn off.

High/Low Beam Switch

Push the multifunction lever away from you to switch
the headlights to high beam. Pull the multifunction lever
toward you to switch the headlights back to low beam.

Flash-To-Pass

You can signal another vehicle with your headlights by
lightly pulling the multifunction lever toward you. This
will turn on the high beam headlights until the lever is
released.

NOTE:

If the multifunction lever is held in the flash-to-

pass position for more than 15 seconds, the high beams
will shut off.

Front Map/Reading Lights

The front map/reading lights are mounted in the over-
head console.

Front Map/Reading Lights

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

205

Advertising
This manual is related to the following products: