Lane change assist, High/low beam switch, Flash-to-pass – Dodge 2012 Charger_SRT - Owner Manual User Manual

Page 208: Front map/reading lights

Advertising
background image

NOTE:

• If either light remains on and does not flash, or there is

a very fast flash rate, check for a defective outside light
bulb. If an indicator fails to light when the lever is
moved, it would suggest that the indicator bulb is
defective.

• A “Turn Signal On” message will appear in the EVIC

(if equipped) and a continuous chime will sound if the
vehicle is driven more than 1 mi (1.6 km) with either
turn signal on.

Lane Change Assist

Tap the lever up or down once, without moving beyond
the detent, and the turn signal (right or left) will flash
three times then automatically turn off.

High/Low Beam Switch

Push the multifunction lever away from you to switch
the headlights to high beam. Pull the multifunction lever
toward you to switch the headlights back to low beam.

Flash-To-Pass

You can signal another vehicle with your headlights by
lightly pulling the multifunction lever toward you. This
will turn on the high beam headlights until the lever is
released.

Front Map/Reading Lights

The front map/reading lights are mounted in the over-
head console.

206

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Advertising