Rear wiper, High beam operation, Auto dimming mirrors – Dodge 2012 Durango - User Guide User Manual

Page 31: Operating your vehicle

Advertising
background image

Rain Sensing Wipers

• This feature senses moisture on the vehicle's windshield and automatically

activates the wipers for the driver when the switch is in the intermittent position.
Rotate the end of the lever to one of four settings to activate this feature and
adjust sensitivity.

• This feature can be activated/deactivated using the Electronic Vehicle Information

Center (EVIC). Refer to the Programmable Features under the Electronics section
in this guide.

• Refer to the Owner's Manual on the DVD for further details.

Rear Wiper

Wiper Operation

• Rotate the center portion of the lever forward to the first detent for intermittent

operation and to the second detent for rear wiper operation.

Washer Operation

• Rotate the center portion of the lever past the second detent to activate the rear

washer.

High Beam Operation

• Push the lever forward to activate the high beams. Pull the lever toward you for

flash to pass.

NOTE: For safe driving, turn off high beams when oncoming traffic is present to
prevent headlight glare and as a courtesy to other motorists.

AUTO DIMMING MIRRORS

• The rearview and driver side exterior mirror automatically adjusts for headlight

glare from vehicles behind you.

• You can turn the feature on or off by pressing the button at the base of the

rearview mirror. A light next to the button will illuminate to indicate when the
dimming feature is activated.

OPERATING YOUR VEHICLE

29

Advertising