Speed control, Cruise on/off, Accel/decel – Dodge 2012 Journey - User Guide User Manual

Page 29: Resume, Operating your vehicle

Advertising
background image

• Rotate the dimmer control up to increase the brightness of the instrument panel

when the parking lights or headlights are on.

• Rotate the dimmer control up to the next detent position to fully brighten the

odometer and radio when the parking lights or headlights are on. Refer to your
Media Center/Radio User Manual on the DVD for display dimming.

• Rotate the dimmer control up to the last detent position to turn on the interior

lighting.

SPEED CONTROL

• The speed control switches are located

on the steering wheel.

Cruise ON/OFF

• Push the ON/OFF button to activate

the Speed Control.

• CRUISE

will appear on the

instrument cluster to indicate the
Speed Control is on.

• Push the ON/OFF button a second time

to turn the system off.

Set

• With the Speed Control on, push and release the SET – button to set a desired

speed.

Accel/Decel

• Once a speed is set, pushing the RES + button once or the SET – button once will

increase or decrease the set speed approximately 1 mph (2 km/h).

• Push and hold the RES + button to accelerate in 5mph (8 km/h) increments or

push and hold the SET – button to decelerate in 5mph (8 km/h) increments;
release the button to save the new set speed.

Resume

• To resume a previously selected set speed in memory, push the RES + button and

release.

OPERATING YOUR VEHICLE

27

Advertising