Change a channel or frequency, Replay mode – Ram Trucks UCONNECT 730N for Jeep User Manual

Page 44

Advertising
background image

Change a Channel or Frequency

Press the SEEK up or the SEEK down hard-key to play
the next available station or channel.

Select DIRECT TUNE to enter a frequency or a channel
number, and confirm your selection by pressing the GO
soft-key.

Touch the left arrow soft-key to step down
manually through the frequency or channel
roster.

Touch the right arrow soft-key to step up
manually through the frequency or channel
roster.

Select the SCAN soft-key for a five second preview of
each listenable station in the frequency band. Touch the
SCAN soft-key again to stop the scan function and to
select a radio station.

Replay Mode

Select the REPLAY soft-key for a replay of the currently
playing satellite radio station.

Use the left and right arrow soft-keys to move the red
replay slider. Depending on broadcast format, it is pos-
sible to replay up to one hour.

32

Advertising
This manual is related to the following products: