Display, Customer programmable features, Uconnect® 8.4 settings – Dodge 2013 Charger-SRT - Owner Manual User Manual

Page 350

Advertising
background image

Customer Programmable Features —
Uconnect® 8.4 Settings

Press the More soft-key, then press the Settings soft-key
to display the menu setting screen. In this mode the
Uconnect® system allows you to access programmable
features that may be equipped such as Display, Clock,
Safety/Assistance, Lights, Doors & Locks, Auto-On
Comfort & Remote Start, Engine Off Operation, Compass
Settings, Audio, Phone/Bluetooth and SIRIUS Setup.

NOTE:

Only one touchscreen area may be selected at a

time.

When making a selection, press the soft-key to enter the
desired mode. Once in the desired mode press and release
the preferred setting until a check-mark appears next to the
setting, showing that setting has been selected.

Once the setting is complete press the Back Arrow
soft-key to return to the previous menu or press the X
soft-key to close out of the settings screen. Pressing the

Up or Down Arrow soft-keys on the right side of the
screen will allow you to toggle up or down through the
available settings.

Display

After pressing the Display soft-key the following settings
will be available.
Display Mode

When in this display you may select one of the auto
display settings. To change Mode status, touch and
release the Day, Night or Auto soft-key. Then touch the
arrow back soft-key.
Display Brightness With Headlights ON

When in this display, you may select the brightness with
the headlights on. Adjust the brightness with the + and –
setting soft-keys or by selecting any point on the scale
between the + and – soft-keys. Then touch the arrow back
soft-key.

348

UNDERSTANDING YOUR INSTRUMENT PANEL

Advertising