Ram Trucks UCONNECT 730N for Jeep - Manual (Page 144)

You can change the state/province and/or country tem-
porarily for the current destination input by touching the
STATE, PROVINCE, or COUNTRY soft-key in this menu.
NOTE:
• A pop-up will appear asking whether or not you
would like the new state, province, or country to
be the default.
• It is recommended to change the default state
and/or default country, if you plan to enter more
than one destination in the destination area (e.g.,
vacation, business travel, etc.).
1. If the COUNTRY is not set to USA, touch COUNTRY,
and touch the USA soft-key for this example.
2. For this example touch STATE and change the state to
Washington D.C.
Enter W into the speller and select WASHINGTON D.C.,
DC from the list. Once selected, a CHANGE soft-key will
appear in the lower right corner of the screen. Touch
CHANGE to confirm your selection.
3. Once the country is set to USA and the state is set to
WASHINGTON D.C., touch the WASHINGTON D.C.
soft-key in the first row of the Street Address screen.
7
Uconnect® GPS NAVIGATION 133