Enable/disable the rear park assist system, Display units of measure in – Dodge 2014 Challenger - Owner Manual User Manual

Page 242

Advertising
background image

or the check-mark is removed showing the system has

been deactivated. Refer to “Keyless Enter-N-Go™” in

“Things To Know Before Starting Your Vehicle”.
Enable/Disable The Rear Park Assist System
The Rear Park Assist system will scan for objects behind

the vehicle when the transmission is in the REVERSE

position and the vehicle speed is less than 11 mph

(18 km/h). The system can be enabled with Sound Only,

Sound and Display, or turned OFF through the EVIC. To

make your selection, press and release the SELECT

button until a check-mark appears next to the feature

showing the system has been activated or the check-mark

is removed showing the system has been deactivated.

Refer to “Rear Park Assist System” in “Understanding

The Features Of Your Vehicle” for system function and

operating information.

Display Units Of Measure In
The EVIC, odometer, and Uconnect® gps (if equipped)

can be changed between English and Metric units of

measure. To make your selection, press and release the

SELECT button until “ENGLISH” or “METRIC” appears.

Uconnect® 730N/430/430N CD/DVD/HDD/NAV —
IF EQUIPPED

Refer to your Uconnect® 730N, 430 or 430N user’s

manual for detailed operating instructions.

Operating Instructions (Voice Command System) —
If Equipped

Refer to “Voice Command” for further details.

Operating Instructions (Uconnect® Phone) — If
Equipped

Refer to “Uconnect® Phone” for further details.

240 UNDERSTANDING YOUR INSTRUMENT PANEL

Advertising