Dodge 2014 Challenger_SRT - User Guide - Manual (Page 112)

FLUIDS AND CAPACITIES
Non-SRT
Component Fluid, Lubricant, or
Genuine Part
Capacities
Engine Coolant –
3.6L Engine
We recommend you use MOPAR®
Antifreeze/Coolant 10 Year/
150,000 Mile Formula OAT
(Organic Additive Technology).
11.1 Quarts (10.5 Liters)
Includes heater and
coolant recovery bottle
filled to MAX level.
Engine Coolant –
5.7L Engine
We recommend you use MOPAR®
Antifreeze/Coolant 10 Year/
150,000 Mile Formula OAT
(Organic Additive Technology).
14.7 Quarts (13.9 Liters)
Includes heater and
coolant recovery bottle
filled to MAX level.
Engine Oil with Filter –
3.6L Engine
We recommend you use API Certi-
fied SAE 5W-20 Engine Oil, meeting
the requirements of Chrysler Mate-
rial Standard MS-6395 such as
MOPAR®, Pennzoil®, and Shell
Helix®. Refer to your engine oil filler
cap for correct SAE grade.
6 Quarts (5.6 Liters)
Engine Oil with Filter –
5.7L Engine
We recommend you use API Certi-
fied SAE 5W-20 Engine Oil, meeting
the requirements of Chrysler Mate-
rial Standard MS-6395 such as
MOPAR®, Pennzoil®, and Shell
Helix®. Refer to your engine oil filler
cap for correct SAE grade.
7 Quarts (6.6 Liters)
Engine Oil Filter We recommend you use MOPAR®
Engine Oil Filters.
–
Spark Plug – 3.6L Engine We recommend you use MOPAR®
Spark Plugs (Gap 0.043 in [1.1 mm]).
–
Spark Plug – 5.7L Engine We recommend you use MOPAR®
Spark Plugs (Gap 0.043 in [1.1 mm]).
–
Automatic Transmission We recommend you only use
MOPAR® ATF+4® Automatic
Transmission Fluid.
Failure to use ATF+4® fluid may
affect the function or performance
of your transmission.
–
Manual Transmission We recommend you use MOPAR®
ATF+4® Automatic Transmission
Fluid.
–
Axle Rear – 5.7L Engine We recommend you use API GL-5
SAE 75W90 Synthetic Gear Lubricant
(with MOPAR® Friction Modifier-
Hypoid Gear Additive).
–
MAINTAINING YOUR VEHICLE
110