Dodge 2014 Challenger_SRT - User Guide - Manual (Page 114)

Component Fluid, Lubricant, or
Genuine Part
Capacities
Power Steering Reservoir
(SRT)
We recommend you use MOPAR®
Power Steering Fluid + 4, or
MOPAR® ATF+4® Automatic
Transmission Fluid.
–
Fuel Selection –
6.4L Engine
We recommend you use Premium
Unleaded 91 Octane or higher.
19.1 Gallons (72 Liters)
(Approximate)
Manual Transmission –
If Equipped
We recommend you use MOPAR®
ATF+4® Automatic Transmission
Fluid.
–
Automatic Transmission
– If Equipped
We recommend you only use
MOPAR® ATF+4® Automatic
Transmission Fluid.
Failure to use ATF+4® fluid may
affect the function or performance
of your transmission.
–
Brake Master Cylinder We recommend you use MOPAR®
DOT 3, SAE J1703. If DOT 3, SAE
J1703 brake fluid is not available,
then DOT 4 is acceptable.
–
CAUTION!
• Mixing of engine coolant (antifreeze) other than specified Organic Additive Technol-
ogy (OAT) engine coolant (antifreeze), may result in engine damage and may de-
crease corrosion protection. Organic Additive Technology (OAT) engine coolant is
different and should not be mixed with Hybrid Organic Additive Technology (HOAT)
engine coolant (antifreeze) or any “globally compatible” coolant (antifreeze). If a
non-OAT engine coolant (antifreeze) is introduced into the cooling system in an
emergency, the cooling system will need to be drained, flushed, and refilled with
fresh OAT coolant (conforming to MS-12106), by an authorized dealer as soon as
possible.
• Do not use water alone or alcohol-based engine coolant (antifreeze) products. Do not
use additional rust inhibitors or antirust products, as they may not be compatible
with the radiator engine coolant and may plug the radiator.
• This vehicle has not been designed for use with propylene glycol-based engine
coolant (antifreeze). Use of propylene glycol-based engine coolant (antifreeze) is not
recommended.
MAINTAINING YOUR VEHICLE
112