Turn signal/wiper/washer/high beam lever, Turn signal/lane change assist, Front wipers – Dodge 2014 Challenger_SRT - User Guide User Manual

Page 26: High beam operation, Turn signal/wiper/washer/high, Beam lever, Operating your vehicle

Advertising
background image

TURN SIGNAL/WIPER/WASHER/HIGH BEAM LEVER

Turn Signal/Lane Change Assist

• Tap the lever up or down once and the turn signal (right or left) will flash three times and

automatically turn off.

Front Wipers

Intermittent, Low And High Operation
• Rotate the end of the lever to the first detent position for one of five intermittent settings,

the second detent for low wiper operation and the third detent for high wiper operation.

Mist
• Rotate the end of the lever downward when a single wipe is desired.

NOTE:

The mist feature does not activate the washer pump; therefore, no washer fluid will be
sprayed on the windshield. The wash function must be activated in order to spray the
windshield with washer fluid.
Washer Operation
• Push the end of the lever inward and hold for as long as spray is desired.

High Beam Operation

• Push the lever forward to activate the high beams. Pull the lever toward you for flash to

pass.

NOTE:

For safe driving, turn off the high beams when oncoming traffic is present to prevent
headlight glare and as a courtesy to other motorists.

OPERATING YOUR VEHICLE

24

Advertising
This manual is related to the following products: