Using the panic alarm – Dodge 2014 Grand_Caravan - Owner Manual User Manual

Page 27

Advertising
background image

• For vehicles equipped with the EVIC, refer to “Elec-

tronic Vehicle Information Center (EVIC)/Personal
Settings (Customer-Programmable Features)” in “Un-
derstanding Your Instrument Panel” for further infor-
mation.

• For vehicles not equipped with the EVIC, perform the

following steps:

1. Perform this operation while standing outside the

vehicle.

2. Press the LOCK button on a programmed RKE trans-

mitter for at least 4 seconds, but no longer than 10
seconds. Then, press the PANIC button while still
holding the LOCK button.

3. Release both buttons at the same time.

4. Test the feature while outside of the vehicle by press-

ing the LOCK button on the RKE transmitter with the
ignition switch in the OFF position and the Key Fob
removed.

5. Repeat these steps if you want to return this feature to

its previous setting.

NOTE:

Pressing the LOCK button on the RKE transmit-

ter while you are in the vehicle will activate the Vehicle
Security Alarm. Opening a door with the Vehicle Security
Alarm activated will cause the alarm to sound. Press the
UNLOCK button to deactivate the Vehicle Security
Alarm.

Using The Panic Alarm

To turn the Panic Alarm feature on or off, press and hold
the PANIC button on the RKE transmitter for at least one
second and release. When the Panic Alarm is on, the

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

25

Advertising