Uconnect® 5.0, Setting the time, Equalizer, balance and fade – Dodge 2014 Durango - User Guide User Manual

Page 68: Electronics

Advertising
background image

Uconnect® 5.0

Setting The Time

1. Press the “MORE” hard-key on the right side of the display, next press the “Settings”

soft-key and then the “Time” soft-key. OR Press the “Settings” hard-key on the right side
of the display, then press the “Clock” soft-key. The Time setting screen is displayed and
the clock can be adjusted as described in the following procedure.

NOTE:
In the Clock Setting Menu you can also select “Display Clock”. Display Clock turns the clock
display in the status bar on or off.

2. Touch the “Up” or “Down” arrows to adjust the hours or minutes, next select the AM or PM

soft-key. You can also select 12hr or 24hr format by touching the desired soft-key.

3. Once the time is set press the “Done” soft-key to exit the time screen.

Equalizer, Balance And Fade

1. Press the SETTINGS hard-key on the right side of the unit.

2. Then scroll down and press the “Audio” soft-key to get to the Audio menu.

3. The Audio Menu shows the following options for you to customize your audio settings.

Uconnect® 5.0

ELECTRONICS

66

Advertising