Clock setting – Dodge 2015 Durango - Uconnect 5.0 Manual User Manual

Page 15

Advertising
background image

Balance/Fade — Press the “Balance/Fade” button

on the touchscreen to adjust the sound from the

speakers. Use the “arrow” button on the touch-

screen to adjust the sound level from the front

and rear or right and left side speakers. Press the

Center “C” button on the touchscreen to reset

the balance and fade to the factory setting. Press

the “Back Arrow” button on the touchscreen

when done.

Speed Adjustable — Press the “Speed Adjusted

Volume” button on the touchscreen to select

between OFF, 1, 2 or 3. This will decrease the

radio volume relative to a decrease in vehicle

speed. Press the “Back Arrow” button on the

touchscreen when done.

Loudness — Press the “Loudness” button on the

touchscreen to select the Loudness feature.

When this feature is activated it improves sound

quality at lower volumes.

Clock Setting

1. If a SETTINGS button on the right side of faceplate

exists, push this button. If not, push the MORE button

on the faceplate then the “Settings” button on the

touchscreen.

2. Select the “Clock and Date” button on the touchscreen.
3. Next, select “Set Time” to change the time.
4. Select “Set Date” to change the date.
5. To set the time, select the “Seek Up”

or “Seek

Down”

arrows as appropriate. Select “12 hrs vs

24 hrs”, “AM” or “PM” or select the “Time Zones”

(if equipped).

6. Select “Done” when complete.

14 RADIO MODE

Advertising