Preparations for jacking – Dodge 2015 Grand_Caravan - User Guide User Manual

Page 93

Advertising
background image

4. Stand the tire/cover assembly upright and remove the wheel spacer by squeezing the

winch retaining tabs together. Push the retainer through the spare tire to release it from
the wheel.

Preparations For Jacking

1. Park the vehicle on a firm, level surface. Avoid ice or slippery areas.
2. Turn on the Hazard Warning flasher.
3. Set the parking brake.
4. Place the shift lever into PARK.
5. Turn OFF the ignition.

NOTE:
Passengers should not remain in the vehicle
when the vehicle is being jacked.
• Block both the front and rear of the

wheel diagonally opposite the jacking po-
sition. For example, if changing the right
front tire, block the left rear wheel.

Wheel Spacer

Wheel Blocked

W H AT T O D O I N E M E R G E N C I E S

91

Advertising