CITIZEN CBM-270 - Manual (Page 84)

CBM-270 User’s Manual
CITIZEN 84
GS C0 m n
[Function] Setting the numbering print mode
[Code] <1D>H<43>H<30>H<m><n>
[Range] 0 £ m £ 5
0 £ n £ 5
[Outline] This command sets the numbering (serial number counter) print mode. m
denotes the number of print columns.
m = 0 Prints the digits indicated by a numeral. In this case, n has no meaning.
m = 1 to 5 Indicates the maximum number of columns to be printed. If a counter value is
larger than this the number of columns set with this command, the printer will
print the lower m-digits of the counter value.
n specifies a printing position within the printing columns.
n = 0 Prints the data right justified. The blank columns are spaced.
n = 1 Prints the data right justified. The blank columns are filled with "0".
n =2 Prints the data left justified. The right blank columns are spaced.
[Caution] If either m or n has a value beyond their ranges, that setting will become invalid.
[See Also] GS C1, GS C2, GS c, GS C
[Default] m = 0, n = 0
[Sample Program]
LPRINT CHR$ (&H1D) ; "C0" ; * CNT
LPRINT CHR$ (0) ; CHR$ (0) ; FOR I=1 TO 5
GOSUB * CNT LPRINT CHR$ (&HID) ; "c" ;
LPRINT CHR$ (&H1D) ; "C0" ; NEXT I
LPRINT CHR$ (1) ; CHR$ (0) ; LPRINT CHR$ (&HA) ;
GOSUB * CNT RETURN
LPRINT CHR$ (&H1D) ; "C0" ;
LPRINT CHR$ (3) ; CHR$ (0) ;
GOSUB * CNT
LPRINT CHR$ (&H1D) ; "C0" ;
LPRINT CHR$ (3) ; CHR$ (1) ;
GOSUB * CNT
LPRINT CHR$ (&H1D) ; "C0" ;
LPRINT CHR$ (3) ; CHR$ (2) ;
GOSUB * CNT
END
[Print Result]
Counts from 1 to 5 at m = 0 and n = 0.
Counts from 6 to 10 at m = 1 and n = 0.
Counts from 11 to 15 at m = 3 and n = 0.
Counts from 16 to 20 at m = 3 and n = 1.
Counts from 21 to 25 at m = 3 and n =2.