Clarion DXZ725 - Manual (Page 23)

DXZ725
27
English
STD mode/G.EQ operations
Note:
• The adjustment made in standard mode is not re-
flected in the adjustment in professional mode.
On the contrary, the adjustment made in profes-
sional mode is not reflected in the adjustment in
easy mode.
G.EQ effect ON/OFF
While the “G.EQ” indication is lit in the display,
the G.EQ effect is set to “ON”.
∗
The factory default setting is “ON”.
1. Press the [A] button and select “G.EQ”.
While “G.EQ” is selected, “G.EQ” blinks in
the display.
2. Press the [D] button. “G.EQ” in the display lit
or unlit.
∗
When “G.EQ” is unlit, the G.EQ effect is set to
OFF.
Note:
• If the G.EQ effect is set to OFF, the adjustment
made in “G.EQ operations” is not reflected in the
music source.
Selecting a G.EQ menu
1. Press the [A] button and select “G.EQ”.
2. Press the [BND] button to select “BASC” (ba-
sic). “BASC” is displayed in the function
mode indication.
3. Press one of the [DIRECT] buttons and se-
lect the desired G.EQ menu.
∗
To select the user memory, press the [BND]
button to select “USR” and press one of the
[DIRECT] buttons.
Editing/storing a G.EQ menu (User
memory)
1. Select a G.EQ menu which you want to edit
on the basis of.
2. Press and hold the [T] button for 1 second or
longer.
3. Press the [ a ] or [ d ] button to select the
frequency to be adjusted.
There are 50Hz, 100Hz, 200Hz, 400Hz,
1kHz, 3kHz and 12kHz available for the ad-
justment frequency.
∗
For details on each adjustment item, refer to
the owner’s manual supplied with the
DPH910.
4. Turn the [ROTARY] knob clockwise or
counterclockwise to make the adjustment.
The adjustment range is from –6 to 6.
5. Repeat steps 3 to 4 to complete the adjust-
ment and press the [T] button.
6. Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the edited
contents.
∗
You can give a title to the user memory. For
the inputting method of titles, refer to the sub-
section “Entering titles” in section “Opera-
tions common to each mode”.
STD mode/DSF operations
DSF effect ON/OFF
When the “DSF” indication is lit in the display,
the DSP effect is set to “ON”.
∗
The factory default setting is “ON”.
1. Press the [A] button and select “DSF”.
2. Press the [D] button. “DSF” in the display lit
or unlit.
∗
When “DSF” is unlit, the DSF effect is set to
OFF.
Note:
• If the DSF effect is set to OFF, the adjustment
made in “DSF operations” is not reflected in the
music source.
Setting the listening position menu
1. Press the [A] button and select “DSF”.
2. Press the [ a ] or [ d ] button to set the lis-
tening position type.
There are FULL SEAT, FRONT-R, FRONT-L,
FRONT (only front seats), REAR (only rear
seats) and PASS available for the listening
position types.
∗
The factory default setting is “FULL SEAT”.
Making fine adjustment of the
listening position
1. Upon completion of setting the listening posi-
tion, press the [ ] button.
2. Press the [ a ] or [ d ] button to select “BAL-
ANCE” or “FADER”. The selected item blinks.
3. Turn the [ROTARY] knob clockwise or
counterclockwise to adjust the balance and
the fader.
4. Press the [ ] button to return to the DSF
mode.
DSP Operations