Casio G'zOne Rock - Manual (Page 147)

146
SETTINGS & TOOLS
Messages: Incoming Messages/Outgoing Messages
For Incoming Messages, set Allow All/Block All.
For Outgoing Messages, set Allow All/Block All.
Dial-Up Modem: Allow/Block
To set any of the submenus, press the Center Select Key [SET].
Phone Lock Setting
This setting specifies whether the handset should be locked
whenever it is turned on.
Lock Mode prevents the unauthorized use of your handset. Once
the handset is locked, it is in restricted mode until the Lock Code is
entered. When in Lock Mode, you can only receive a phone call, make
a 911 call, or call an (In Case of Emergency) ICE contact. You can
change the Lock Code using the Security menu.
1. From idle mode, press the Center Select Key [MENU], select
Settings & Tools, then press the Center Select Key [OK]. Press
Phone Settings, Security.
2. Enter the four-digit Lock Code, then press the Center Select Key
[OK]. The default Lock Code is the last 4 digits of your phone
number.
3. Press  Phone Lock Setting.
4. Select one of the following settings, then press the Center Select
Key [SET].
Unlocked: Your handset is unlocked.
On Power Up: Your handset will be locked when it is turned on.
Lock Phone Now
1. From idle mode, press the Center Select Key [MENU], select
Settings & Tools, then press the Center Select Key [OK]. Press
Phone Settings, Security.
I
I